Get Down To Business: 3 Steps To Prevent Plumbing Emergencies In Your Commercial Building

If you own a business, you want to make sure that your customers—and employees—have a clean place to take care of their own business. That means you need to make sure that the bathrooms are in good working order. The best way to avoid emergency plumbing problems is to take the proper preventative measures. Here are three steps you should take to keep your commercial plumbing up and running.

Get Your Septic System Pumped

If your commercial property is attached to a septic system, you need to have it pumped out and serviced on a regular basis. An overfilled septic tank can lead to some serious plumbing issues. First, an overfilled septic tank can cause foul odors to come up through the drain pipes, leaving your office smelling like raw sewage. Second, an overfilled septic tank can lead to an increased occurrence of clogs. Finally, an overfilled septic tank can cause raw sewage to back up through the drains leading out of your bathroom. For maximum protection, you should have your drains cleaned each time you have your septic system serviced. This will remove residual sewage from the drains.

Keep the Water Heaters Adjusted

Water heaters can be a source of frustration for business owners, especially when it comes to temperature regulation. Too cold, and dirty hands don't get clean enough. Too hot, and you run the risk that your employees and customers suffer severe burns when washing their hands. To prevent problems, you should have your plumber come out and adjust the water heater.

Get Your Toilets Updated

If your commercial building is equipped with outdated toilets, you may be facing a couple of problems. First, they may not be flushing as well as they should, which means you could be left to deal with clogs. Second, they may be wasting water, which could mean that you're spending more money on your water bill than you need to. To make sure that your toilets are as effective—and efficient—as they should be, talk to your commercial plumber about having them replaced with new low-flow toilets. Low-flow toilets use about 1.3 gallons of water per flush. If you have more than one toilet in your building, the savings could be significant.

If you own a business, make sure your bathrooms are operating properly. Use the information provided here to prevent plumbing emergencies due to bathroom issues. For other tips on how to prevent plumbing emergencies, talk to your commercial plumber. 


Share